Skip to content
Menu
Skip to product information

AquaCo | Whole House Water Softener System | Classic 2 stage

$3,600.00 AUD
Order today - enjoy pure water between Wednesday, 21 May and Monday, 26 May.

AquaCo Classic 2 Stage - Softener - Whole House System Details

  • Works for hard water, city water, well water and tank water.

  • Purifies all water (Town, Bore, Dam, and Rain) before entering your home or business. Cleans your water from the source.

  • A WaterMark approved water softener to remove calcium and hardness. Reduces scaling, stains and white marks in your home appliances, tapware, shower screens and glassware.

  • Extend the life of your appliances, including coffee machines, kettles, steamers, and many other appliances and fixtures.

  • Protects your water heater from scale build up in the heating element.

  • No marks or spots after washing your car or solar panels.

  • Clearer and more appealing ice cubes.

  • Removes traces of metals such as copper, iron and manganese, arsenic, lead, aluminium and others. Say goodbye to scale build up and hard water stains with our Fully Automatic Water Softening Filter System with Classic Pre-Filtration.

  • Unlike resin softening resin cartridges that only have 2 litres of resin inside, cannot regenerate and need frequent changing, our Automatic Water softener has 28 Litres of resin.

  • Performs automatic regenerations every 17,000 Litres at 100mg/l of hardness, significantly extending the life of the resin, which can reach up to 10 years with proper maintenance.

  • This set up includes a pre-filtration system which is essential for the performance of the water softener. It serves a dual purpose: it safeguards the water softener's functionality and simultaneously eliminates a wide range of impurities, including chlorine, dirt, rust, industrial solvents, unpleasant odours, discoloration, flammable liquids, and other harmful contaminants.

Sediment Filter – Contaminant Reduction
Particles >5 microns - 99.999% (Sand, silt, rust, clay, algae)

Carbon Filter – Contaminant Reduction
Chlorine - 100% (Taste & Odours)Turbidity - 99% (Colour)VOCs - 99%Pesticides - 97%

Dimensions: 410 mm x 740 mm x 290 mm

Filtration stages: 2

Housing size: 20" x 4.5"

Capacity: 300,000L

Maximum flow rate: 60 L/pm

Maximum pressure:90 PSI (620kPa)

Operating pressure: 70 PSI (480kPa)

Operating temperature: 0.5°C-60°C

Manufactured: Australia and Taiwan

Carbon Filter: Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.

Other Components:
System WaterMark Certification No. 23448

Filters and Components are Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.

Manufacturing facilities are ISO 9001 and ISO 14001 Certified.

ISO 9001 is the ultimate benchmark for quality management, this means products meet expectations and quality standards.

Note: The ISO 14001 refers to the fulfilment in environmental performance requirements such as, resource efficiency, waste reduction, costs easing, environmental impact measurement and competitive advantage in supply chain design.

 

We have partnered with renowned plumbers from Apex Trades. Please see below for standard installation inclusions.

Please note: Standard installation is available for all of metropolitan Melbourne, extending to within 100km's of Melbourne CBD. Please contact us before ordering if out of this area for regional pricing.

What is included with a whole house system installation?

  • Whole house system installed to within 3m of the connection point or water meter*. 
  • Any grounds that are either raised or require digging will be reinstated. Whilst Apex Trades will do their upmost to ensure the reinstatement is to the original standard. We cannot guarantee the condition of reinstatement.

  • Commissioning of system and testing for any leaks.

Other possible expenses you may incur:

  • *Outside of the 3m will require an on-site quote for the extra pipework and labour involved.

  • External frame to mount whole house system $150 +GST
  • Alterations to cabinet space for optional Reverse Osmosis will require an on-site quote for extra work involved.
  • If pressure exceeds 500 kPa, a Pressure Regulating Valve is required to be installed to ensure compliance as per VBA regulations. $254 +GST
  • Once installed. Installation warranty will be void if other trades are to perform maintenance on the filter system.

Apex Trades have been in the industry for many years and perform all their work to the highest standard. Please see their website for more details.

If you have any further questions regarding installation please feel free to contact us at support@purefiltration.com.au or 1300 307 521

Thank you.

AquaCo-Water-Softener+Twin-Whole-House-Water-Filter-Combo classic front view

AquaCo | Whole House Water Softener System | Classic 2 stage

$3,600.00

Your Cart

Your Cart is empty

Your Wishlist